JK 60A BMS- 5200 Taka
Jk 3.2-inch Display: 1900 Taka
Specification:
Model: JK-BD4A24S6P
Supported Cell Count (S): 7–24S (per manufacturer);
8–24S (commonly referenced)
Continuous Current Rating: 60 A
Peak Current: 100 A
Balance (Equalization) Current: ~0.4 A (active balancing)
Compatible Battery Chemistries: LiFePO₄, Lithium-ion, LTO
Communication Options: RS-485, CANbus, UART, Bluetooth
Protection Features: Overcharge, over-discharge, short-circuit, SOC/SOH/SOP
Certifications: ISO9001, ISO14001, CE, RoHS
Typical Use: For all types of lithium batteries
Basic Information:
Model Number: JK-BD4A24S6P
Supported Cell Count (Series Configuration):
Li-ion / Li-Po: 7 S – 24 S
LiFePO₄ (LFP): 8 S – 24 S
LTO: 12 S – 24 S
Battery Chemistry Supported: Li-ion, LiFePO₄, LTO, Li-Po (with automatic chemistry detection)
Electrical Performance
Continuous Charge Current: 60 A
Continuous Discharge Current: 100 A
Active Balancing Current: Approximately 0.4 A
Internal Circuit Resistance: Approx. 1.3 mΩ
Voltage & Accuracy Specifications
Single-Cell Voltage Range: Configurable, ~1.0 V – 5.0 V
Voltage Balancing Accuracy: ± 3 mV
Cell Voltage Detection Accuracy: ± 5 mV
Overcharge Protection Setpoint: 1.2 V – 4.35 V per cell (adjustable); Release voltage up to 4.55 V
Overdischarge Protection Setpoint: 1.2 V – 4.35 V per cell (adjustable)
Overcurrent Protection: 10 A – 100 A (adjustable threshold)
Overcurrent Release Delay: Adjustable, 2 s – 120 s
Protection & Safety Features
Overcharge protection
Overdischarge protection
Overcurrent protection
Short-circuit detection
Temperature monitoring (multiple sensors, e.g., 3-point)
Coulomb counter (battery usage tracking)
Storage mode (low-power) and standby/shutdown for prolonged inactivity
Cascade mode support for linking multiple BMS units
Communication & Interface
Wireless / App Support: Bluetooth support, compatible with Android and iOS for real-time monitoring and parameter configuration
Wired Interfaces (Optional): CANbus, RS-485
Optional GPS integration via RS-485 (depending on variant)
Form Factor: Slim PCB or enclosed module design
Dimension:
13.5*8.3*1.76 cm
Use Cases
Widely applicable to:
Energy storage systems
Electric vehicles (EVs), scooters, golf carts
Solar inverters and high-power battery systems
Backup power and base station applications
📜 Warranty Policy
Warranty Period: 6 months from the date of purchase.
Coverage:
Manufacturing defects in materials and workmanship.
Internal circuit failure under normal use.
Faults due to poor soldering or faulty components.
Exclusions:
Damage caused by improper wiring or incorrect installation.
Use outside the specified voltage/current range.
Physical damage (cracks, burns, water ingress, corrosion).
Modifications or repairs performed by unauthorized personnel.
Warranty Claim Process:
Provide proof of purchase (invoice or order ID).
Provide photos/videos showing the issue.
Return the defective unit to the seller or service center for inspection.
If the claim is approved, the unit will be repaired or replaced at no charge.
